Chery A1 2009 Service Manual page 964

Description
The exterior lamps consist of the following:
• Headlamps
• Turn Signal Lamps
• Fog Lamps
• Stop Lamps
• Backup Lamp
• Position Lamps
Operation
• Headlamps: With the light switch in the 2nd position, voltage is applied to the Front Fuse and Relay Box. The
voltage then energizes the right and left headlamp relays. The relays provide voltage to the headlamps through
individual circuits.
• Turn Signal Lamps: When the turn signal switch is in LH or RH position with the ignition switch in the ON posi-
tion, voltage is applied to the RH or LH turn signal circuit.
• Hazard Lamps: When the hazard switch is in the ON position, voltage is applied to all the turn signal lamps.
• Fog Lamps: When the front/rear fog lamp switch is in the ON position and the light switch is in the 1st or 2nd
position, voltage is applied to the fog lamps.
• Stop Lamps: When the brake pedal is applied, the stop lamp switch sends voltage to the stop lamps.
• Backup Lamp: When the transaxle is shifted into reverse, voltage is applied to the backup lamp.
Specification
Torque Specification
DESCRIPTION
Front Combination Lamp Retaining Bolt
Rear Combination Lamp Retaining Screw
Chery Automobile Co., Ltd.
EXTERIOR LAMPS
TORQUE (N·m)
8 ± 1
8 ± 1
15–
15
195