Chery A1 2009 Service Manual page 628

6.
CHECK SYSTEM VOLTAGE
• Maintain engine speed to over 1000 RPM.
• Measure the charging voltage at the battery positive and negative terminals.
Is the voltage more than 17 V?
Yes >>
Replace the AC generator.
No >>
Go to the next step.
7.
CHECK DTC
• With the X-431 scan tool, read the ABS module DTCs.
• Refer to DTC Confirmation Procedure .
Is DTC C1101 or DTC C1102 still present?
Yes >>
Replace the ABS module (See ABS Module Removal & Installation in Section 12 Brakes).
No >>
The system is now operating properly.
Erase all codes and test drive the vehicle to verify the repair is complete.
38
12–
DIAGNOSIS & TESTING
Chery Automobile Co., Ltd.