Configure Cycle Settings - Juniper HarvestMaster mirus H2 User Manual

Mirus for H2 Classic GrainGage
6 . 3.1 Conf igure Cycle Settings
The cycle settings determine the settings of the Start/Cycle/Go button. These settings can change the
Countdown Mode, Button Type, Toolbar Position, and the Countdown Time.
The countdown timer sets a wait time at the start of each cycle to ensure all the grain in the current plot
reaches the GrainGage before cycling.
Harvest Mode
To configure the Countdown Mode,
1. Tap the cycle settings icon
Countdown
2. Select Countdown or Cycle.
Cycle
3. If you choose Countdown, adjust the countdown time.
4. Tap the check icon
Adjust the
seconds.
To change the Button Type,
1. Tap the cycle settings icon
2. Select Floating or In Toolbar.
When you select Floating, Mirus prompts you to choose
the size of the floating Start/Cycle/Go button.
If you choose Floating, the Start/Cycle/Go button appears
Floating
as a separate dialog box that can be moved to any
location.
In Toolbar
Choose the
button size.
(If you choose Cycle, there is no countdown timer.)
in the toolbar.
.
in the toolbar.
104