Configure Test Weight In Spatial Display - Juniper HarvestMaster mirus H2 User Manual

Mirus for H2 Classic GrainGage
6 . 3.10 Conf igure Test Weight in Spatial Display
To set the minimum and maximum test weight,
1. Tap the Spatial Display icon
2. Select the Test Weight attribute.
3. Tap the gear icon
4. Set the Minimum and Maximum Test Weight Settings.
5. Tap the check icon
Adjusting the minimum and maximum values helps to create a more detailed legend and define the scope
of the graphs and maps. The narrower the minimum and maximum range, the more detailed the
information displayed becomes.
Harvest Mode
to display data in a heat map format.
in the Attribute bar.
.
Set the minimum
and maximum test
weight.
Tap the gear
icon.
Select the
test weight
attribute.
114