Create A Standard Plot Id Map - Juniper HarvestMaster mirus H2 User Manual

Mirus for H2 Classic GrainGage

5 .1. 2 Create a Standard Plot ID Map

A Standard Plot ID map gives a unique ID number to each individual plot. The number of Ranges and
Rows can reach up to 999. However, the display number can reach up to five digits, depending on how you
choose to number the plots.
Starting Plot ID
Rows Wide
Plot
Row
Increment
Replication
Increment
Field Maps
In a Standard Plot ID map,
• Range indicates a horizontal group of plots.
• Ranges deep indicates the number of ranges within a
given field.
Plot numbering begins in the bottom left corner of a field.
In the example to the left,
• Starting plot is 101
Range
• Field map is four ranges deep
• Row indicates a vertical group of plots.
• Rows wide indicates the number of rows within a
given field.
• Plot increment is the numeric interval between plots.
This will usually be 1.
In the example to the left,
• Plot increment is 1
• Field map is six rows (plots) wide
• Reps (or Replication) usually indicates the same
horizontal group of plots in a particular range as in the
above examples. However, in some cases a replication
will extend beyond a range (left).
• Plots per replication indicates the number of plots in
each replication.
• Replication increment is the numeric interval
between the first plots in each replication (e.g., 100,
1000, or 10000).
In the example to the left,
• Replication increment is 100
• Field map is six rows (plots) wide
• Plots per replication is 12
75