Table of Contents
Advertisement
Mirus for H2 Classic GrainGage
Weight Sensors Settings
Setup Parameter
Slope and Motion
Compensation
Trip Point
Weigh Time
Weight Tare
Warning
Note: Preconfigured values are default values based on generalized harvest conditions. They may not
reflect the optimum settings for the harvest conditions for your particular climate, fields, or grains.
Changing default values requires a certain level of experience. Please contact HarvestMaster Field Service
Engineers when adjusting these settings. See 8.4.2 Contact a HarvestMaster Field Service Engineer on
page 128.
2. 3. 5 Conf igure Test Weight Sensors
On the Setup > H2 GrainGage > Sensors screen,
1. Tap Test Weight.
Mirus opens the Test Weight Sensor Setup screen on which you can configure test weight settings for the
GrainGage.
Mirus and H2 Classic GrainGage Setup
Default Value
Description
This corrects weight errors resulting from movement and
Yes
vibration as well as harvesting on a slope .
The percentage of full bucket capacity at which a weight trip
80%
cycle will occur .
The period over which weight readings are averaged .
1000 msec
A shorter weigh time may reduce the accuracy of the
measurement .
0 .500 lb
This is the threshold above which a tare warning is
(0 .227 kg)
generated after weigh bucket evacuation .
23
Advertisement
Table of Contents
