Configure Plot Size And Yield In Spatial Display - Juniper HarvestMaster mirus H2 User Manual

Mirus for H2 Classic GrainGage
6 . 3.11 Conf igure Plot Size and Yield in Spatial Display
To set the minimum and maximum plot size and yield,
1. Tap the Spatial Display icon
2. Select the Yield attribute.
3. Tap the gear icon
4. Set the Plot Length and Width.
5. Set the Minimum and Maximum Yield.
6. Tap the check icon
The values set here help calculate the yield per acre (bu/ac, kg/ha) using the weight measurements divided
by the plot area. For each minimum and maximum changed, the Legend will change to match the correct
values.
Adjusting the minimum and maximum values helps to create a more detailed legend and define the
scope of the graphs and maps. The narrower the minimum and maximum range, the more detailed the
information displayed becomes.
For examples of standard bulk density and standard moisture values see 7 Appendix A: Standard Grain
Information on page 121.
Harvest Mode
to display data in a heat map format.
in the Attribute bar.
.
Set plot length and
width.
Set the minimum
and maximum yield.
Tap the
gear icon.
Select the yield
attribute.
115