Mirus for H2 Classic GrainGage
4 H2 Classic GrainGage Calibration
4 .1 Slope and Motion Calibration
Slope and motion calibration establishes the 1G voltage for the accelerometer inside the GrainGage. This
calibration is critical for good weight measurements on the moving combine. It only needs to be done
once a year.
H2 Classic GrainGage Calibration
1. Park the combine on a level surface.
2. Shut off the engine and keep the GrainGage powered
on.
3. Go to Home > Setup > H2 GrainGage.
4. Tap Calibration.
5. Tap Slope & Motion Calibration.
6. Select Open Calibration Wizard.
43