Mirus for H2 Classic GrainGage
6 .4. 2 Har vest with Countdown Timer
1. Open the Mirus Harvest screen.
2. Select a map, configure the harvest setup, choose traits, and choose a moisture curve. See 6.2 Open
Harvest Mode on page 99 for specifics.
3. Start the thresher and throttle up.
4. Tare the GrainGage if necessary.
5. Tap the Start button in Mirus.
Start
6. Harvest the first plot.
7. When the head is clear, start the countdown timer by pressing remote enter or tapping the
countdown timer button
8. When prompted with a green Go button
9. Repeat for each plot.
Harvest Mode
.
, start into the next plot.
118