Configure Moisture In Spatial Display - Juniper HarvestMaster mirus H2 User Manual

Mirus for H2 Classic GrainGage
6 . 3.9 Conf igure Moisture in Spatial Display
To set the minimum and maximum moisture,
1. Tap the Spatial Display icon
2. Select the Moisture attribute.
3. Tap the gear icon
4. Set the Minimum and Maximum moisture.
5. Tap the check icon
Adjusting the minimum and maximum values helps to create a more detailed legend and define the scope
of the graphs and maps. The narrower the minimum and maximum range, the more detailed the
information displayed becomes.
Harvest Mode
to display data in a heat map format.
in the Attribute bar.
.
Set the minimum
and maximum
moisture.
Tap the gear
icon.
Select the
moisture
attribute.
113