Device Tables - Delta AS Series Programming Manual

AS Ser ies Pro gra mm in g M anu al

3.2.4 Device Tables

This section describes the table format used in the rest of this manual to describe each instruction.
_3
Description:
: The applied instruction number
: The instruction name
If the 16-bit instruction can be used as the 32-bit instruction, add a D in front of the 16-bit instruction to form the 32-bit
instruction.
: The operand
: The function of the instructions
: The devices that are supported by the operand
1. The decimal forms are indicated by "K", but you enter them directly in ISPSoft. For example, enter the decimal
number 30 in ISPSoft.
2. The hexadecimal forms are indicated by 16#. For example, the decimal number 30 is represented by 16#1E in
the hexadecimal system.
3. The floating-point numbers are indicated by "F" or "DF", but they are represented by decimal points in ISPSoft.
For example, the floating-point number F500 is represented by 500.0 in ISPSoft.
4. The strings are indicated by "$", but they are represented by quotes (" ") in ISPSoft. For example, the string
1234 is represented by "1234" in ISPSoft.
3 - 6