Omron NT620S Operation Manual page 267

Commands/Responses
Character string memory table write command
Command
Format
Response
Format
Function
256
[ESC] W S
1B 57 53
d1 d1
1 2
* * * *
m : Check sum present/absent (1 BCD digit)
t to t : Character string memory table number written to
1 4
d1 to d1 , ..., dn
1 2 1
s , s : Check sum (2 hexadecimal digits)
1 2
Only if "Yes" is set for the "Response" memory switch, the response indicated
below is returned on normal completion.
[ESC] W
1B 57
s , s : Check sum (2 hexadecimal digits)
1 2
S Writes specified data to the specified character string memory tables.
m t t
1 2
* * * * * *
dn dn
1 2
* * * *
0 : Absent
1 : Present
(4 BCD digits)
0000 to 0255
to dn :
2
Contents of the read character string memory tables
(2 digits (hexadecimal) corresponding to 1 to 40 char-
acters)
00 to FF
In the case of character string memory tables allo-
cated to the host, specify the registered number of
words multiplied by 2, and in the case of character
string memory tables not allocated to the host specify
the data for 40 characters.
When m is 0 or 8, omit this setting.
S 0 0
53 30 30 32
This is always added (fixed as "25").
Section 6-3
(Sent from host to PT)
t t
3 4
* * * *
(s ) (s ) [CR]
1 2
* * * * 0D
s s [CR]
1 2
35 0D