Omron NT620S Operation Manual page 306

Method for Making the Cable for Connection
Explained below is the method for making the cable that connects the NT620S/620C and the PC.
Connect the wires to the connectors in accordance with the connector specification for each unit.
Parts Required
Two connectors, two connector covers and one cable are required to make up a connecting cable. One connector
and one connector cover is supplied with most PCs.
Name Model
Connector XM2A-0901
XM2A-2501
DB-25P
Connector XM2S-0911
Cover
XM2S-2511
DB-C2-J9
When connecting the NT620S/620C to an OMRON PLC CjjH , the connector and the connector must be pre-
pared separately since they are not supplied with the CjjH.
The connector provided in the CPU unit of the CjjH is a 9-pin connector. For the connection, the following con-
nector and connector cover should be prepared.
- Connector:
- Connector cover:
Prepare the cable recommended by OMRON.
The recommended cables are indicated in the following table.
Name
AWG28X5P
IFVV-SB
Cable Cable
CO-MA-VV-SB
5PX28AWG
Appendix G
to the PC
Delivered with
C series CQM1
CVM1/CV series CPU unit
CV500-LK201
C500-LK203
C500-LK201
C200H-LK201
C500-LK201-V1
C120-LK201-V1
C series CQM1, C200HS,
C200HX/HG/HE
CVM1/CV series CPU unit
CV500-LK201
C500-LK203
C500-LK201
C200H-LK201(-V1)
C500-LK201-V1
C120-LK201-V1
XM2A-0901 (9-pin type, OMRON)
XM2S-0911 (9-pin type, OMRON)
Type
Multiconductor shielded cable (FUJIKURA, Ltd.)
Multiconductor shielded cable (HITACHI Cable, Ltd.)
Remarks
9-pin, manufactured by OMRON
25-pin, manufactured by OMRON
25-pin, manufactured by JAE
9-pin, manufactured by OMRON
25-pin, manufactured by OMRON
25-pin, manufactured by JAE
Remark
301