Omron NT620S Operation Manual page 127

Creating and Transmitting Screen Data
Note
4-1-2 Creating Screen Data
Screen Data Creation Method
Screen Data Creation Procedure
NT620C
- NT Model : 610C (There is no "620C" setting.)
- Memory Size : 1024 KB
- Direct Access : Ver.4
Since the NT620S and NT620C are, from the standpoint of functions, almost
identical to the NT612G and NT610C, they do not have their own "NT Model"
setting. Make the following settings for these two models:
NT620S : "610G"
NT620C : "610C"
The screen data is created by using the support tool. The support tool registers
the screen data used with one NT620S/620C to one file.
Screen data can be created by one of the following three methods:
• creating a new file;
• editing an existing file;
• reading and editing selected screens from an existing file.
The following gives the basic screen data creation procedure. Required settings
and reference pages are given for each step of the procedure.
Select "Tool Settings" in the Main Menu to display the "Tool Settings" screen.
Settings of NT model, memory size, direct connection, etc. are made in this
Section 4-1
115