Table of Contents
Advertisement
Commands/Responses
Response
Format
Function
Touch switch input notify command
Command
Format
s
, s
: Check sum (2 hexadecimal digits)
1
2
Only if "Yes" is set for the "Response" memory switch, the response indicated
below is returned on normal completion.
[ESC]
C
1B
43
s
, s
: Check sum (2 hexadecimal digits)
1
2
S Initializes all the character string memory tables within the range specified by
the "first cleared character string memory table number" and "final cleared
character string memory table number" to the value set with the support tool.
S If settings are omitted for both the "first cleared character string memory table
number" and the "final cleared character string memory table number", all the
character string memory tables are cleared. It is not possible to omit just one of
these settings.
[ESC]
S
T
1B
53
54
d
d
3
4
* *
* *
c
to c
: Changed word number (4 BCD digits)
1
4
d
to d
: Contents of the word after the change
1
4
a
to a
: Changed bit information (4 hexadecimal digits)
1
4
s
, s
: Check sum (2 hexadecimal digits)
1
2
If m is 0, omit this setting.
S
0
0
s
53
30
30
31
This is always added (fixed as "11").
c
c
c
c
1
2
3
* *
* *
* *
* *
a
a
a
a
1
2
3
* *
* *
* *
* *
0000 to 9999
This is the number of the word containing the allo-
cated bit of the touch switch at which there has been a
change.
(4 hexadecimal digits)
0000 to FFFF
0000 to FFFF
The changed bit in the "contents of the word after the
change" is set to "1".
This is always added.
Section
6-3
s
[CR]
1
2
31
0D
(Sent from PT to host)
d
d
4
1
2
* *
* *
s
s
[CR]
4
1
2
* *
* *
0D
259
Advertisement
Chapters
Table of Contents
