Omron NT620S Operation Manual page 294

Specifications
Item
Resume function
Screen print function
Communications Specifications
[For a Host Link]
Item
Communications standard
Communications settings
Connector
Number of units connected
Transmission distance
Communications protocol
[For an NT Link]
Item
Communications standard
Connector
Number of units connected
Transmission distance
* When NT-AL001 used;
RS-232C cable: Max. 2 m
RS-422A cable: Total length 500 m
[For an NT Link (1:N, RS-232C)]
Item
Communications standard
Connector
Number of units connected
Transmission distance
To retain the contents without initializing the memory table (character-string/nu-
meral value) when turning ON the power, resetting, changing over the opera-
tion mode.
Setting: Set the "Resume Function" to "ON" in the "MEMORY SWITCH MENU".
To print the screen just displayed by means of printer interface connector.
Setting: Set an output specification in the "MEMORY SWITCH MENU".
NT620S
ESC/P TONE: Conforms to ESC/P 24-J81C
PR201H TONE: Conforms to NEC PL-PR201H
HP TONE: Conforms to PCL5
NT620C
ESC/P COLOR:
ESC/P TONE:
PR201H COLOR:
HP TONE:
EIA RS-232C
Start-stop synchronization
Baud rate: 9600, 19,200 bps
Data length: 7 bits
Stop bit: 2 bits
Parity: Even
9-pin, D-SUB connector (female)
1 to 1
Max. 15 m
C-series SYSWAY (1:N)
EIA RS-232C
9-pin D-SUB connector (female)
1 to 1
Max. 15 m*
EIA RS-232C
9-pin D-SUB connector (female)
1:1 to 8
S RS-232C cable
: Max. 2 m*
S RS-422A/485 cable : Total length 500 m*
Specifications
Conforms to ESC/P 24-J83C, color printing
Conforms to ESC/P 24-J83C,
monochrome 8 grayscale levels
Conforms to NEC PL-PR201H
Conforms to PCL5
Specification
Specification
Specification
Appendix A
285