S Character-String Memory Table Read Command - Omron NT620S Operation Manual

Commands/Responses
Function
Character string memory table read command
Command
Format
252
d1 to d1 , ..., dn
1 m 1
s , s : Check sum (2 hexadecimal digits)
1 2
S Reads the data from the specified number of numeral memory tables, starting
from the specified numeral memory table.
S A maximum of 100 tables can be read at one time.
S In the response, the data of a maximum of 20 tables can be returned at one
time. If reading of more than 20 tables is specified, multiple responses are
made, each comprising the data of 20 tables. Note that the "first word number
read" in the second and later responses will be the word number of the first
word of the response data.
[ESC] R
1B 52 53
(l ) (l
1
* * * *
m : Check sum present/absent (1 BCD digit)
t to t : First character string memory table number read
1 4
I , I : Number of read tables (2 BCD digits)
1 2
s , s : Check sum (2 hexadecimal digits)
1 2
to dn :
m
Contents of the numeral memory tables
(1 to 8 hexadecimal digits)
0 to FFFFFFFF
Since initial zeroes are omitted, there may be less
than 8 digits. The data for individual tables is delimited
by commas.
This is always added.
S m t t
1 2
* * * * * *
) (s ) (s ) [CR]
2 1 2
* * * * 0D
0 : Absent
1 : Present
8 : Absent (only 1 table read)
9 : Present (only 1 table read)
(4 BCD digits)
0000 to 0999
01 to 20 : 1 to 20
When m is 8 or 9, omit this setting.
When m is 0 or 8, omit this setting.
Section 6-3
(Sent from host to PT)
t t
3 4
* * * *