Omron NT620S Operation Manual page 75

Operation Modes and the System Menu
Selecting the Menu Items
System Menu Items
Switching from the System Menu to the RUN Mode
62
Press (touch) a menu item on the screen to select the item.
Menu items allow to make the ON/OFF selection or to call subsequent menu or
screen.
Example 1
To call the "Maintenance Mode Menu" by pressing the "Maintenance Mode" on
the System Menu screen:
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
MAINTENANCE MENU
Quit
Display History
I/O Check
PT Settings
Init. Memory
Memory Switch
The System Menu items and the functions are as given below.
Menu Item
Quit The System Menu screen is cleared and the NT620S/620C will
return to the RUN mode.
Transmit Mode The Transmit Mode screen will be displayed to allow the trans-
mission of the screen data between the NT620S/620C and the
support tool. For the transmission of the screen data, refer to
Section 3-5 "Registering the Screen Data" (page 77).
Maintenance Mode The Maintenance Mode menu will be displayed to allow the
maintenance of the NT620S/620C system.
Expansion Mode For future expansion. Currently not used.
The NT620S/620C will exit the System Menu and switch to the RUN mode in the
cases mentioned below.
S Selecting "Quit" in the System Menu.
S The screen (touch switches) is not pressed for over 10 seconds.
Section
Select "Maintenance Mode".
V0.0
Function
3-3