Character-String Setting - Omron NT620S Operation Manual

Character-String Setting

4-9 Character-String Setting
168
Character type:
Character magnification:
Character display attribute: Normal display only ("reverse" and so forth
Zero suppress:
For details, refer to the "Numerals which can be Displayed" (page 135).
NT620S/620C has a function of character-string setting to enter a character-
string on a screen.
The character-string setting allows a character-string to directly be entered from
the touch switch into the character-string memory table, displayed in the screen,
and also sent to the PC.
This section outlines the character-string setting function and explains how to in-
put character-strings during operation. The character-string setting function can
only be used when using Ver.3 or a later version of the direct connection function.
For the actual method used to ascertain input character-strings at the PC, see
"Notification of Character-string to the PC" (page 222).
The character-string setting is carried out when creating a screen with the sup-
port tool.
Wide size only
Either of double, x4, or x9 in correspon-
dence with display size specified
are not available)
"Without zero suppress" only
Section 4-9