Omron NT620S Operation Manual page 175

Numeral Setting
Numeral setting
cursor moving key
Reference
• Specifying the column using the system key
When the system keys
the order that the numeral setting input column is created by the support tool.
For example, when three numeral setting input columns are created, a cursor
can be moved in due order as follows:
key: First ! Second ! Third ! First
key: First ! Third ! Second ! First
When the "Numeral Setting Screen" for the screen attribute is set to "System",
the order of movement using the system keys
For details, refer to NT-series Support Tool Operation Manual (V028-E1-j).
• Specifying the column using the cursor moving key
With the cursor moving key of the touch switch being set, the numeral setting
input column can be specified only by touching the key.
1234
Pressed
5678
Position to
9012
be entered
- When using Ver.2.j of the NT-series support tool, cursor moving keys can be
automatically created as touch switches associated with the input fields when
numeral setting input fields are created.
- The pop-up window function ("open") can also be assigned to the cursor mov-
ing keys (if the keys are created automatically, this function can be set by modi-
fication).
and of the touch panel, a cursor can be moved in
and
1234
5678
9012
Section 4-8
can also be changed.
Position to
be entered
is moved.
163