Omron NT620S Operation Manual page 20

Functions of NT620S/620C
1-2-3 Principal Functions of NT620S/620C
Functions relating to data display
Character display
Characters of various sizes can be displayed. Characters can be flashed and high-
lighted.
Figure display
Solid lines, squares, polygons, circles, circular arcs, fan shapes can be displayed.
They can also be painted with various patterns, flashed, or highlighted.
Memory data display
The contents of character-string memory table and of the numeral table can be dis-
played. The memory table contents can be changed from the PC.
Graph display
Not only bar graphs but also broken line graphs (Note) and trend graphs (Note) can
be displayed, using the numeral table.
Lamp display
Lamps can be turned on or flashed as controlled by the PC.
Alarm list display (Note)
In response to the state of PC contact, warning messages are automatically listed,
plus when and how many times the messages appeared can also be displayed.
Functions relating to
data input
Input by the touch switch
Data can be input by simply touch-
ing the screen. There are various
touch switch functions such as
sending input data to the PC.
Pop-up window function
A window overlaying the currently
displayed screen can be alternately
opened and closed by pressing a
touch switch.
In addition to fixed displays, numeric
keys and character keys can be set
inside the window. Since the win-
dow need only be opened when in-
put is required, the screen can be
used effectively.
Numeric value/character
string setting function
Touch switch keys can be assigned
numeric values or character strings
so that these values and character
strings may be input at the operation
site or even written onto the numer-
ic/character-string table and sent to
the host.
6
The following are the principal functions of the NT620S/620C:
Functions relating to the system
System functions
System settings and maintenance can be performed by selecting from system
menus displayed on the screen.
Creation of screen data
Screen data created by using a support tool on a personal computer can be
transferred and stored to the image data memory installed to the
NT620S/620C.
System program installation function
By using the optional system installer, the NT620S/NT620C system program
can be changed.
Section
Function relating to data
output
Buzzer
A built-in buzzer can be sounded.
Screen printing
A hard copy of the screen may be
printed onto the printer connected
to the NT620S/620C.
Function relating to
communication
Communications with PC
The NT620S/620C communi-
cates with PC, through various
host I/F units or NT link so that
data or control commands may
be received from PC or informa-
tion entered from touch
switches may be sent to the PC.
1-2