Table of Contents
Advertisement
• Forced shutdown—Press and hold the Power switch for more than 4 seconds, then release. The
appliance immediately powers itself off without shutting down the operating system.
CAUTION: Forced shutdown can result in data loss and corruption of the file system.
Use the forced shutdown method as a last resort to recover appliance if the appliance
operating system is not responding to the graceful shutdown method.
WARNING: Do not press the Power switch while the appliance is shutting down.
To remove power completely from the appliance, unplug the power cord or switch off the power source.
After powering off a power supply, wait at least 10 seconds before turning it back on.
After powering on a power supply, wait at least 10 seconds before turning it off.
Connect SSR1200 to External Devices
IN THIS SECTION
Connect SSR1200 to a Management Console | 34
SSR1200 has a console port and a management port. You can configure and manage the SSR1200
appliance using the console port.
Connect SSR1200 to a Management Console
SSR1200 has a console port with an RJ-45 connector. Use the console port to connect the appliance to
a management console or to a console server.
A RJ-45 to USB A serial cable is provided with the appliance.
To connect the SSR1200 appliance to a management console:
34
Advertisement
Table of Contents
