Juniper SSR1200 Hardware Manual page 47

41
In the onboarding process, conductor-managed appliances reinitialize to use the factory-default
configuration with the conductor IP address. During the initialization process, it reaches out to the
conductor and pulls down the appropriate configuration.
After a few minutes, the SSR1200 appears in the Inventory with the status as Unassigned. Once it
appears in the inventory, it must be assigned to a site. Assign the SSR1200 appliance to a site to
complete the SSR onboarding. See "Assign SSR1200 to a Site" on page 41.
Assign SSR1200 to a Site
After the SSR has been onboarded to the Mist Cloud, assign it to a site to begin managing the appliance
configuration and gathering data in Mist.