ACX2000 Universal Access Routers Quick Start
Step 4: Connect External Devices and Cables
Figure 6: Ethernet Cable Connector
Figure 7: Front Panel of the ACX2000 Router
Tools Required to Connect External Devices and Cables
To connect external devices and cables to the router, you need the following tools:
Connect the ACX2000 Router to a Network for Out-of-Band Management
1.
2.
10
All manuals and user guides at all-guides.com
1
2
3
4
ACX2000
0/0/8
MGMT
CONSOLE/AUX
ALARM
10MHz
1PPS
IN
OUT
IN
OUT
SYS
0
1
EXT REF CLK IN
0/0/0
14
13
12
11
10
1—
DC terminal
2—
Management Ethernet port
3—
Console or auxiliary port
4—
Alarm contact port
5—
T1/E1 and RJ45 Gigabit Ethernet network
ports
6—
PoE Gigabit Ethernet ports
7—
ESD point
Tools Required to Connect External Devices and Cables on page 10
Connect the ACX2000 Router to a Network for Out-of-Band Management on page 10
Connect the ACX2000 Gateway to a Management Console or Auxiliary
Device on page 11
Connect Network Interface Cables to the ACX2000 Router on page 11
Ethernet cable with an RJ-45 connector attached (provided)
RJ-45 to DB-9 serial port adapter (provided)
Management host, such as a PC, with an Ethernet port (not provided)
Turn off the power to the management device.
Plug one end of the Ethernet cable
the
MGMT
port on the front of the chassis.
5
T1/E1
GE
0/0/9
0/0/10
0/0/11
0/0/12
0/0/13
0/0/14
0/0/15
0/1/4
0/1/5
0/0/1
0/0/2
0/0/3
0/0/4
0/0/5
0/0/6
0/0/7
0/1/0
0/1/1
8—
10-Gigabit Ethernet SFP+ ports
9—
Gigabit Ethernet SFP ports
10—
External clocking ports
11—
External clocking input port
12—
USB ports
13—
System LED
14—
Grounding terminal
(Figure 6 on page 10
Figure 7 on page 10
Copyright © 2016, Juniper Networks, Inc.
6
7
0/1/6
0/1/7 POE
GE
XE
0/1/2
0/1/3 POE
0/2/0
0/2/1
0/3/0
0/3/1
9
8
shows the connector) into
shows the port.