Exit Menu - Fujitsu PRIMERGY RX600 S4 User Manual

Chapter 7 Configuring Hardware and Utilities

7.2.20 Exit Menu

This menu is for exiting BIOS Setup Utility.
Main Advanced
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
Info
F1
Esc Exit
You can select items for the BIOS settings as shown below.
Item
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values
172
Phoenix TrustedCore(tm) Setup Utility
Security Power
-/+ Change Values
Select Item
Select Menu Enter Select
table: Exit menu
Saves the current settings and exits BIOS Setup Utility. After exiting BIOS
Setup Utility, depending on the items changed, the server may reboot, or
automatically start up after the power is turned off.
Exits BIOS Setup Utility without saving current settings. Previously saved
settings remain valid.
Sets all the items by loading default values of this server.
For [Local IP Address], [Subnet Mask], and [Gateway Address] of [LAN
Settings], the values will not be reset.
Sets all the items by loading CMOS values before the changes. The current
settings are canceled.
All the items on the [LAN Settings] submenu will not be reset.
Exit
Server Boot
Item Specific Help
Setup Defaults
F9
Save and Exit
Sub-Menu F10
Description