Custom Real Time I/Q Baseband
Working with Data Patterns
Navigating the Bit Values of an Existing Data Pattern User File
1. Press
>
>
Goto
4
C
This moves the cursor to bit position 4C, of the table, as shown in the following figure.
Cursor moves to new position
Inverting the Bit Values of an Existing Data Pattern User File
1. On the keypad, press
This inverts the bit values that are positioned 4C through 4F. Notice that hex data in this row has
now changed to 76DB6DB6, as shown in the following figure.
Bits 4C through 4F inverted
186
>
.
Enter
1011.
Position indicator changes
Hex Data changed
Chapter 7