Viewing Header Information for a Different Waveform File
While a waveform is playing in the dual ARB player, you can view the header information of a
different waveform file, but you can modify the header information only for the waveform that is
currently playing. When you select another waveform file, the header editing softkeys are grayed–out
(see
Figure 3-
6). This task guides you through the available viewing choices.
1. View the waveform file list: Press
As shown in
Figure 3-
Figure 3-7
2. View all waveform segments in non–volatile memory:
a. Press the
Catalog Type
types that can be displayed in the table accessed in step one.
NVWFM
Seq
WFM1
b. Press the
NVWFM
3. View a waveform file's header information: Highlight a file and press the
The header information for the selected waveform file appears in the PSG display. If there is a
waveform playing, its header information is replaced by this information, but the waveform
settings used by the signal generator do not change. To return to the header information for the
playing waveform, either press
press
, or
View Header
press
>
Return
Header Utilities
Chapter 3
>
Mode
7, there is an alphabetical list of waveform files in the table.
Waveform File List for Viewing a Different Header
softkey. As shown in
displays all waveform segments stored in non–volatile memory
displays all waveform sequence files
displays all waveform segments stored in volatile memory
softkey. The table displays the waveform files in non–volatile memory.
View Different Header
.
>
>
Dual ARB
ARB Setup
Header Utilities
Figure 3-
7, you have a choice of three waveform file
, select the current playing waveform file, and
Basic Digital Operation
Arbitrary (ARB) Waveform File Headers
>
View Different Header
Current waveform file type
Waveform File Types
Table
softkey.
View Header
.
89