Bowflex BXT8J Service Manual page 82

26. With the area clear, push the ENTER button. The calibration procedure will begin by automatically moving the Walking Belt.
Be sure not to touch or allow anyone else to touch the machine while calibration is occurring.
27. When calibration is complete, the Console will display "DONE".
28. Push the PAUSE/STOP button to exit the Engineering Mode.
29. Flip the power switch to OFF. Calibration is now complete for the machine.
30. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's
Manual.
82