Bowflex BXT8J Service Manual page 111

18. Connect the Cables from the new Right Upright, and attach it to the
Frame Assembly.
Note: Be sure not to pinch or cut the cables when attaching the Right
Upright to the Frame Assembly.
19. Make sure there is sufficient space to lower the walking deck.
Keep a minimum clearance behind the machine of 79" (2 m)
and 19.7" (0.5 m) on each side. This is the recommended safe
distance for access, movement and emergency dismounts
from the machine.
20. Make sure there is no object on or around the treadmill to spill or
cause blockage from the fully unfolded position.
21. Slightly push the walking deck forward toward the console. With your
foot lightly push the top part of the hydraulic lift forward until the locking
tube releases and you can pull the walking deck away from the console.
Hold up the rear of the walking deck, and move to the side of the machine.
Keep clear of the movement path of the walking deck.
22. The hydraulic lift is set up to drop gradually. Hold onto the walking
deck until approximately 2/3 of the movement down. Lower the weight
with your legs. Be aware that the walking deck can possibly drop quickly
in the last part of the movement.
23. Re-install all remaining parts that were removed in reverse order.
Note: when re-attaching the Console Backing, be sure to attach the hard-
ware marked with the ( * ) first, then the hardware with the ( ** ), followed
by the remaining hardware.
24. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
2
**
111
X13
B
#2
*
*
**