Bowflex BXT8J Service Manual page 130

11. Using a #2 Phillips screwdriver remove the 4 indicated screws from
the Right Deck Suspensions.
12. Remove the Right Deck Suspension.
13. Make sure there is sufficient space to lower the walking deck.
Keep a minimum clearance behind the machine of 79" (2 m)
and 19.7" (0.5 m) on each side. This is the recommended safe
distance for access, movement and emergency dismounts
from the machine.
14. Make sure there is no object on or around the treadmill to spill or
cause blockage from the fully unfolded position.
15. Slightly push the walking deck forward toward the console. With your
foot lightly push the top part of the hydraulic lift forward until the locking
tube releases and you can pull the walking deck away from the console.
Hold up the rear of the walking deck, and move to the side of the machine.
Keep clear of the movement path of the walking deck.
16. The hydraulic lift is set up to drop gradually. Hold onto the walking
deck until approximately 2/3 of the movement down. Lower the weight
with your legs. Be aware that the walking deck can possibly drop quickly
in the last part of the movement.
17. Using a #2 Phillips screwdriver remove the 4 indicated screws, and
two additional screws on the far side, from the Motor Cover and remove it.
Deck Suspension
Motor Cover
130