Bowflex BXT8J Service Manual page 44

!
1. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
2. Using the support bar found below the rear of the walking belt, lift the
walking deck fully upward and engage the hydraulic lift. Be sure that the
hydraulic lift is correctly locked in place. You will hear an audible click
when the hydraulic lift shifts into the locked position.
Use proper safety precautions and lifting techniques. Bend
your knees and elbows, keep your back straight and pull up
equally with both arms. Make sure that your own physical
strength is capable of lifting the walking deck until it engages
the locking mechanism. Use a second person if necessary.
Do not use the walking belt or rear roller to lift the treadmill.
These parts do not lock in place and can abruptly move. Injury
to you or damage to the machine can occur.
3. Make sure that the locking mechanism is engaged. Carefully pull back
on the walking deck and make sure that it does not move. When you do
this, keep clear of movement path in case the treadmill lock is not properly
engaged.
Do not lean against the treadmill when it is folded. Do not put
items on it that could cause it to become unstable or fall.
4. Using a #2 Phillips screwdriver, remove the 2 screws (indicated with
arrows) from the Deck Wheel Cover.
5. Remove the Deck Wheel Cover from the machine.
6. Using a 13mm wrench and a 6mm hex wrench, remove the hardware
(indicated by oval) from the Deck Wheel.
7. Remove the old Deck Wheel and replace with the new Deck Wheel.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power
cord from the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place
the power cord in a secure location.
44
Deck Wheel
Deck Wheel Cover