Bowflex BXT8J Service Manual page 122

4. Using a #2 Phillips screwdriver, remove the 2 indicated screws (by ar-
row) that attach the Speed Sensor to the Frame near the Drive Pulley.
Note: Be sure to observe the distance from the Speed Sensor to the Drive
Pulley. This distance affects the effectiveness of the Speed Sensor and
Drive Belt
will be used for the re-assembly process.
Speed
Drive Pulley
Sensor
5. Cut the 4 Zip-Ties that secure the Speed Sensor Cable.
Speed
Sensor
Speed Sensor Cable Zip-Tie
Motor Control Board
(MCB)
Speed Sensor Connector
Note: The above photo shows the BXT8Ji machine, with Choke and Filter included.
122