Bowflex BXT8J Service Manual page 104

!
1. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
2. Using a #2 Phillips screwdriver, remove the indicated screw (with arrow)
from each of the Rear Roller Covers.
Note: Though the following image shows the Walking Deck raised, it is not
necessary to complete the next steps.
3. Using a #2 Phillips screwdriver, remove the indicated screw (with arrow)
from each of the Rear Roller Covers.
4. Remove the old Rear Roller Covers, and attach the new Rear Roller
Covers.
Note: To assist with reassembly, be sure to notice how the Endcap Base
Shroud is secured by the Rear Roller Cover.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power
cord from the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place
the power cord in a secure location.
Endcap Base
Shroud
Rear Roller Covers
Endcap Base
Shroud
Rear Roller Cover
104