Bowflex BXT8J Service Manual page 140

Note: Your machine may not match the provided images exactly.
19. Using a 6mm hex wrench, remove the 3 indicated screws from each
side of the Walking Deck.
Securing Tab
20. Slide the old Walking Deck Assembly out of the Walking Belt, and flip
over so the Walking Belt Guides are exposed.
Walking Belt Guides
21. Using a #2 Phillips screwdriver, remove the Walking Belt Guides and
attach them to the new Walking Deck as shown.
Securing Tab
Note: The Walking Belt Guides must be attached to the new Walking
Deck on the side with the Securing Tabs.
22. Turn over the new Walking Deck Assembly, and slide it between the
Walking Belt with the Walking Belt Guides down and to the front of the
machine.
Walking Belt Guide
Securing Tab
140