Bowflex BXT8J Service Manual page 73

!
1. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
2. Gently unsnap both sides of the Handlebar Shrouds to release them,
and remove them from the Console Assembly.
3. Using a #2 Phillips screwdriver, remove the 12 indicated screws from
Console Backing. Be sure not to mix the self-tapping screws from the
previous step.
4. Make sure that there is safe clearance around, on and above the
treadmill. Make sure there is no object to spill or cause blockage from the
fully folded position.
Be sure there is adequate height clearance for the raised deck.
5. Using the support bar found below the rear of the walking belt, lift the
walking deck fully upward and engage the hydraulic lift. Be sure that the
hydraulic lift is correctly locked in place. You will hear an audible click
when the hydraulic lift shifts into the locked position.
Use proper safety precautions and lifting techniques. Bend
your knees and elbows, keep your back straight and pull up
equally with both arms. Make sure that your own physical
strength is capable of lifting the walking deck until it engages
the locking mechanism. Use a second person if necessary.
Do not use the walking belt or rear roller to lift the treadmill.
These parts do not lock in place and can abruptly move. Injury
to you or damage to the machine can occur.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power
cord from the wall outlet and wait 5 minutes before cleaning, maintaining or repairing this machine. Place
the power cord in a secure location.
Handlebar Shroud
73
Left Tray
Right Tray