Bowflex BXT8J Service Manual page 18

Unit will not power on, or power is on but Console does not light up
Unplug the power cord
from both ends. Inspect
the entire cord for any
damage or crimps. Plug
the power cord back in
securely at both ends.
Replace power cord if any
plugged directly into a
NO
3-prong wall outlet?
Connect power cord
directly to a 3-prong
outlet.
Verify outlet is working by
device, such as a lamp. If
Replace Circuit Breaker
BEGIN HERE
damage is noted.
Is the power cord
YES
connecting another
not working, find a
working outlet.
Press Circuit Breaker
Switch next to the Power
Switch to reset the Circuit
YES
Unplug the power cord
from the wall outlet and
YES
minutes before proceed-
ing. Remove the Motor
power wiring using the
"Replace the Power Inlet"
procedure in the Service
Does light come
Manual as a reference,
on?
and ensure all wires are
correctly connected and
NO
power wiring using the
"Replace the Power Inlet"
procedure in the Service
Manual as a reference,
and ensure all wires are
correctly connected and
Is the machine
NO
Unplug the power cord
Circuit Breaker
from the wall outlet and
tripped?
minutes before proceed-
YES ing. Remove the Motor
Breaker.
Does the Circuit
Breaker keep
tripping?
NO
Issue resolved
18
the machine. Wait 5
and MCB Covers.
Check/reseat the AC
secure.
Check/reseat the AC
secure.
the machine. Wait 5
and MCB Covers.
Replace I/O cables
YES
Is the issue you
were experiencing
still present?
NO
Issue resolved
NO
Is the issue you
were experiencing
still present?
YES
Contact
Tech Support at
800.861.7401
for further assistance.