8 Storage enclosure management
Select a method for accessing the controller module (CM), based on your own system requirements or the requirements of
your customers.
Table 5 Methods of access to controller module
Type
Local serial port connection and a terminal emulator
Serial over LAN (SOL)
Console redirection (iKVM)
Select an interface that best fits your requirements to directly or remotely monitor and manage storage enclosure activity.
Table 6 Interface options
Method
Command-line interface (CLI)*
Storage Management Console (SMC)*
JSON-based API
Redfish/Swordfish-based API
XML-based Application Programming Interface (API)
*Access method discussed in the following content
TIP Use the QR code on the included Getting Started sheet to access related storage enclosure documentation online.
Command-line interface usage
One of the simplest methods of monitoring and managing activities performed by the storage enclosure system is to use the
command-line interface (CLI) embedded in each controller module. There are two primary access methods:
Direct connection to a controller module's serial USB port using a terminal emulator installed on a management host
l
Remote connection to a secure LAN using either SSH or HTTPS
l
= SAS 4-port
12Gb/s
63 Chapter 8 Storage enclosure management
Description
Local access to CM using serial port input and output
Remote access to CM redirected serial port input and output to network
Local access to CM using a keyboard, video or monitor, and mouse
Description
Supports interactive and scripted commands
Provides web-based GUI
Provides means to conduct JSON-based operations
Provides means to conduct Redfish/Swordfish operations
Provides means to conduct XML-based operations
Item Description
1
Manufacturing USB port: Do not use
2
Serial USB port for use with supplied serial cable
Figure 46 USB ports on sample SAS 4-port controller module
1
2