To install the 2U rackmount rail kit:
1. Remove both outer rail assemblies from their packaging.
1
2. Orient the outer rail with the LH FRONT embossed on it to your left, the other with the RH FRONT embossed on it to your
right, and each emboss toward you, facing inward.
3. Loosen, but do not remove, the 2 set screws on each outer rail with a Philips screwdriver.
4. Facing the left side of the rack cabinet, slide the left front mount bracket pins into holes in the front rack post.
5. Bias the left rack mount bracket as far inward as possible, then verify the entirety of the lower rail tab is visible just beyond
the inner edge of the front rack mount bracket.
25 Chapter 4 Installation of 2U enclosures
2
Item Description
1
Left front mount bracket
2
Left front outer rail
3
Left rail slides
Figure 8 2U enclosure outer rail components
3
4
Item
Description
4
Set screw, front
5
Set screw, rear
6
Left rear mount bracket
5
6