Seagate Exos X 4006 Series Hardware Installation And Maintenance Manual page 91

Table 16 5U enclosure corrective action for fault conditions (continued)
Symptom
Module fault LED is on
and Drawer logical fault
LED is on
Ops panel fault LEDs for hardware faults
Module fault LED is on
and Drawer module fault
LED is on
and carrier LED is on
Module fault LED is on
and Logical fault LED is
on
and carrier LED is on
91 Chapter 9 Hardware installation and configuration issues
Cause Recommended action
A fault condition related
1. Inspect the drawer panel for a fault amber LED that is on.
to the hardware or system
2. Inspect the LEDs on the carriers in the drawer for these conditions:
application logic
3. Select one of the following actions:
4. Inspect the LEDs on the drawer sideplanes. If a sideplane fault condition exists,
5. Scan the enclosure event log for specific fault information and follow
6. If the above actions do not resolve the fault, replace the faulty drive module or
A fault condition related
1. Inspect the drawer panel for a fault amber LED that is on.
to the hardware in the
2. Inspect the LEDs on the carriers in the drawer for these conditions:
related drawer
3. Select one of the following actions:
4. Scan the enclosure event log for specific fault information and follow
5. If the above actions do not resolve the fault, replace the faulty drive module or
A fault condition related 1. Inspect the drawer panel for a fault amber LED that is on.
to the hardware in the
2. Inspect the LEDs on the carriers in the drawer for these conditions:
related drawer
3. Select one of the following actions:
4. Scan the enclosure event log for specific fault information and follow
5. If the above actions do not resolve the fault, replace the faulty drive module or
The carrier LED is off.
l
The carrier fault amber LED is on, not flashing.
l
If the carrier LED is off, verify that the carrier is fully inserted, the latch is
l
fully engaged, and the storage enclosure is powered on.
If the fault LED is on, narrow the fault to the drive module, a connection, or
l
both.
contact your support representative.
recommended actions.
carrier as soon as you have a replacement.
The carrier LED is off.
l
The carrier fault amber LED is on, not flashing.
l
If the carrier LED is off, verify that the carrier is fully inserted, the latch is
l
fully engaged, and the storage enclosure is powered on.
If the fault LED is on, narrow the fault to the drive module, a connection, or
l
both.
recommended actions.
carrier as soon as you have a replacement.
The carrier LED is off.
l
The carrier fault amber LED is on, not flashing.
l
If the carrier LED is off, verify that the carrier is fully inserted, the latch is
l
fully engaged, and the storage enclosure is powered on.
If the fault LED is on, narrow the fault to the drive module, a connection, or
l
both.
recommended actions.
carrier as soon as you have a replacement.