Navigating In Setup Mode - Intermec EasyCoder PD42 User Manual

Chapter 3 — Configuring the Printer
32
While in Setup mode, use the soft keys to navigate through the
various options in the setup tree.

Navigating in Setup Mode

Soft Key Function
Move one menu item to the left on the same level.
Move one menu item to the right on the same level.
Move up one level.
Acknowledge/Move down one level.
Edit value
Increase value
Decrease value
Exit Setup mode.
The main nodes of the setup tree are organized in a loop, as
shown below (detailed overviews are provided in Appendix C
(Fingerprint) and Appendix D (IPL)). Each main node branches
out to a number of sub-nodes. At startup, the firmware
determines if optional equipment such as a cutter or an interface
board is installed in the printer, and these are added to the Setup
tree.
SETUP:
SER-COM, UART1
SETUP:
PRINT DEFS
SETUP:
MEDIA
SETUP:
FEEDADJ
The main nodes of the Setup tree (Fingerprint).
Starting point
SETUP:
NET-COM, NET1
SETUP:
EMULATION
EasyCoder PD42 Printer User's Guide
SETUP:
COM
SETUP:
NETWORK
Option