Navigating In Setup Mode - Intermec EasyCoder F2 Installation And Operation Manual

Navigating in
Setup Mode
Intermec EasyCoder F2 – Installation & Operation Ed. 1
While going through the setup procedure, you are guided by texts
in the printer's display. You can step between setup menus, acknowl-
edge displayed values, select or type new values etc. by means of
some of the keys on the printer's keyboard.
Note!
An external keyboard cannot be used inside the Setup Mode.
-
1
/. "Left", "right", "up", and "down" refer to the diagrams on the
following pages.
Chapter 7
Move one menu to the left on the same level
Move one menu to the right on the same
1
level .
Display error message at test labels printing
failure.
Move up one level or scroll back in a stack
1
of options .
Move down one level or scroll forward in a
1
stack of options .
Enter numeric values.
Specify negative values (leading position).
Clear erroneously entered values.
Acknowledge and move to next menu.
Perform testfeeds in the Testfeed menu.
Print test labels in the Test Label menu.
Exit the Setup Mode.
(Can be used anywhere in the Setup Mode).
Setup Mode
1
.
56