Navigating In Setup Mode - Intermec EasyCoder PX4i User Manual

Navigating in Setup Mode

EasyCoder PX4i Bar Code Label Printer User's Guide (Fingerprint Version)
Enter the Setup Mode by pressing Setup on the printer's front
panel. Text in the display guide you through the setup procedure.
Use the printer's keyboard to navigate menus, acknowledge
displayed values, or select or enter new values.
Note: An external keyboard cannot be used inside the Setup
Mode.
Keyboard Buttons for Setup Mode
Button Function
Move one menu to the left on the same level or
scroll back in a stack of options.
Move up one level.
Move one menu to the right on the same level or
scroll forward in a stack of options.
Move down one level.
Display error messages at test label printing
failure.
Enter numeric values.
-
Specify negative values (leading position).
Clear displayed values.
Acknowledge and move to next menu or perform
test feeds in the Testfeed menu, or print test
labels in the Test label menu.
Exit the Setup Mode. Can be used anywhere in
Setup Mode.
Chapter 7 — Setup Mode
79