Navigating In Setup Mode - Intermec EasyCoder PF4i User Manual

Navigating in Setup Mode

While going through the setup procedure, you are guided by texts in the
printer's display. You can navigate between setup menus, acknowledge
displayed values, select or type new values, etc. by using the keys on the
printer's keyboard.
Note: An external keyboard cannot be used inside the Setup
Mode.
-
1 /. "Left", "right", "up", and "down" refer to the overviews later in this chapter.
Intermec EasyCoder PF4i—User's Guide (Fingerprint version)
Move one menu to the left on the same level or scroll back in a
1
stack of options .
Move up one level 1 .
Move one menu to the right on the same level or scroll forward
1
in a stack of options
Move down one level
Display error messages at test label printing failure.
Enter numeric values.
Specify negative values (leading position).
Clear displayed values.
Acknowledge and move to next menu or perform testfeeds in
the Testfeed menu, or print test labels in the Test label menu.
Exit the Setup Mode. Can be used anywhere in Setup Mode.
Chapter 7—Setup Mode
.
1
.
65