Navigating In Setup Mode - Intermec easycoder f2 Installation & Operation Manual

Chapter 7 Setup Mode
Navigating in
Setup Mode
54
While going through the setup procedure, you are guided by texts in
the printer's display. You can step between setup menus, acknowledge
displayed values, select or type new values etc. by means of some of
the keys on the printer's keyboard.
Note!
An external keyboard cannot be used inside the Setup Mode.
-
1
/. "Left", "right", "up", and "down" refer to the diagrams on
the following pages.
Intermec EasyCoder F2 – Installation & Operation Ed. 2
Move one menu to the left on the same
1
level .
Move one menu to the right on the same
1
level .
Display error message at test labels printing
failure.
Move up one level or scroll back in a stack
1
of options .
Move down one level or scroll forward in a
1
stack of options .
Enter numeric values.
Specify negative values (leading position)
Clear erroneously entered values.
Acknowledge and move to next menu.
Perform testfeeds in the Testfeed menu.
Print test labels in the Test Label menu.
Exit the Setup Mode.
(Can be used anywhere in the Setup Mode).