Intermec EasyCoder PD42 User Manual page 18

Chapter 1 — Using the Printer
Soft Key Functions
Soft Key Function
F1 to F5 Defined by Fingerprint
application
Enter/Exit setup
Feed
Testfeed
Enter/Exit i-mode
Left/previous state
Up
apply/acknowledge/select
8
Below the display are five buttons that act as "soft keys," which
means that the function of each button depends on the state of
the printer. The function is indicated with a small icon in the
display just above the key itself.
You can use the buttons for things like pausing a print job,
running a testfeed or changing setup parameters.
Note: If the printer is running a Fingerprint application, access to
Setup mode is controlled by the application.
The function of each soft key is described below.
Soft Key Function
Right/next state
Edit value
Exit editing/cancel/exit test
mode/exit dumpmode
Decrease selected digit
Increase selected digit
Pause
Continue
Save to file
EasyCoder PD42 Printer User's Guide