Loading Thermal Transfer Ribbon - Intermec EasyCoder PD42 User Manual

Loading Thermal Transfer Ribbon

EasyCoder PD42 Printer User's Guide
6 Reattach the front cover.
7 Push in on the lower part of the label-taken sensor and bring
it out to a fully horizontal position.
8 Close the side door.
9 Press the Print button to advance the media.
Thermal transfer printing makes it possible to use a wide range of
receiving face materials and gives a durable printout that is less
vulnerable to fat, chemicals, heat, sunlight and so on than direct
thermal printing. Make sure to select a ribbon type that matches
the type of receiving material and set up the printer accordingly.
The ribbon is normally loaded at the same time as a new media
roll. For clarity, the following illustrations do not show the media
roll. See the previous sections for information on how to load
media for your type of operation.
Chapter 2 — Installing the Printer
19