Usb Host Interface; Easylan Ethernet Interface - Intermec EasyCoder PD42 User Manual

USB Host Interface

EasyLAN Ethernet Interface

EasyCoder PD42 Printer User's Guide
Appendix A — Specification, Interfaces, and Options
The PD42 printer is equipped with a USB host interface, which
means you can connect various USB devices (bar code scanners
and keyboards of HID type, memory sticks and USB hubs) for
use with the printer.
Pin Function
1 VBUS
2 D-
3 D+
4 Gnd
The EasyLAN Ethernet interface has an RJ-45 socket for use
with a standard RJ-45 cable. The interface supports 10/100
Mbps Fast Ethernet (10BASE-T, 100BASE-TX) and is fully
compliant with the IEEE 802.3u standard. The network card
MAC address can be found on the label below the socket.
Network status LEDs
Ethernet RJ-45
socket
One yellow and one green LED indicate the network status as
follows:
Network Status LEDs
Green On
Off
Blinking
Yellow On
Off
Ethernet RJ-45
connector
Link
No link
Activity
100BASE-TX
10BASE-T
65