System Power-On Procedure - Yamaha RY30 Authorized Product Manual

l System Power-on
Procedure
Believe it or not, there's a right way and a wrong way to turn on the components
in any music system.
In general, instruments and preamplifiers/mixers should always be turned on
before subsequent power amplifiers, and preamplifier/mixer master volume con-
trols should be turned all the way down when the system is being powered up.
Failure to do this properly can result in damage to your power amplifiers and
speakers.
Also, MIDI transmitting devices should be turned on before the associated
receiving device.
1. Make sure your sound system's volume control(s) and the RY30 volume
control are turned all the way down prior to turning power on.
2. Turn on the master keyboard (if used).
3. Turn on the sequencer (if used).
4. Turn on the RY30.
5. Turn on the sound system.
6. Raise the sound system volume to a reasonable level.
7. Gradually raise the RY30 [VOLUME] control while playing the pads to set
the desired listening level.
15