02: Voice/Pitch Assign; 03: Pad Bank Copy - Yamaha RY30 Authorized Product Manual

VOICE ASSIGN
Please note this function is selected only if pad
bunk number 00 through 15 is selected using the
"PAD BANK SELECT" function, above. The
"PITCH ASSIGN" function described below is
selected instead of this function if pad bank 16 (pitch
multi) is selected.
Summary: Assigns any of the internal or card
voices to the specified instrument pads for the
currently selected pad bank.
Settings: Voice: I00 . . . I95 (internal), C00 . . . C31
(card)
Pad: A . . . L
Procedure: Use the
cursor to the voice number or pad parameter.
Use the [INC] and [DEC] keys, the [DATA]
slider, or the instrument pads to to select the
pad number.
Notes: This function allows you to set up a range of
custom drum/percussion sets to suit different
songs and musical styles.
Summary: Copies the pad-to-voice assignments
from the currently selected pad bank (i.e. those
made using the "VOICE ASSIGN" function
described above) to the specified destination
pad bank number.
VOICE/PITCH ASSIGN
and keys to move the
PAD BANK COPY
PITCH ASSIGN
Please note this function is selected only if pad bank
number 16 (pitch multi) is selected using the "PAD
BANK SELECT" function (page 99). The "VOICE
ASSIGN" function described above is selected
instead of this function if pad bank 00 through 15 is
selected.
Summary: Assigns a single voice to all 12 instru-
ment pads, with the voice pitched over an entire
octave.
Settings: Voice: I00 . . . I95 (internal), C00 . . . C31
(card)
Pitch offset: -60 - -49 . . . +49 - +60
Procedure: Use the
cursor to the voice number or pitch range
parameter. Use the [INC] and [DEC] keys, the
[DATA] slider, or the instrument pads to to
select the voice number. Use the [INC] and
[DEC] keys or the [DATA] slider to enter the
pitch range.
Notes: The pitch offset parameter shifts the pitch of
the entire octave up or down in semitone steps. A
setting of "±00 - +11" sets pad A to the normal
pitch for the selected voice.
Settings: Destination bank: 00 . . . 15
Procedure: Use the [INC] and [DEC] keys, the
[DATA] slider, or the numeric keys to select the
pad bank to which the current assignments will
be copied.
PAD BANK MODE
Pad Bank mode/Page
and keys to move the
Pad Bank mode/Page 03
02
101