Clearing The Entire Song; Song Play - Yamaha RY30 Authorized Product Manual

Clearing the Entire Song

l l Song Play
6. When a pattern has been selected, press the [ENTER] key — the PART
number will advance by one and you can select and enter the next pattern
number in the same way.
7. Continue selecting and entering patterns in this manner until your pattern is
complete.
8. Press the [STOP/CONTINUE] key to exit the song record mode and return
to the normal song mode display.
NOTE: You can delete the previously entered pattern and move back one part by
pressing the [CLEAR] key.
If you want to scrap the whole song and start again, use the SONG CLEAR
function (page 63):
1. After stopping the song press the [PAGE+] key once to call the SONG
CLEAR page.
2. Press the [ENTER] key twice.
3. After the "Complete !" display appears briefly, press the the [SONG] key
or the [EXIT] key to go back to the main song page, then start recording
again.
Selecting and playing a song is essentially the same as selecting and playing a
pattern (page 19).
1. Press the [SONG] key to select the song mode (if it is not already
selected). A display similar to the following should appear:
2. Use the [INC] and [DEC] keys, the [DATA] slider, or the numeric keys to
select a song number between 00 and 19.
3. Press the [START] key to start playback of the selected song. The song will
play through to the end and then stop. The LED to the right of the
[STOP/CONTINUE] key will flash at the current tempo during playback. The
measure and part numbers on the bottom line of the display will advance as
playback of the song progresses.
33